How to install a shaft mounted geared motor

How to install a shaft mounted geared motor.Here, it is mainly described by discussing the connection between the shaft-mounted gear motor and the working machine, the connection between the shaft-mounted gear motor and the working machine, and the installation of the anti-torque bracket.The following is the Shanghai reducer to describe in detail how to install.

XNUMX. The connection between the shaft-mounted gear motor and the working machine

In order to avoid the deflection of the main shaft of the working machine and the additional force on the bearing of the reducer, the interval between the reducer and the working machine should be as small as possible without affecting the normal operation, and its value is 5-10mm.

XNUMX. The connection between the shaft-mounted gear motor and the working machine

The reducer is directly fitted on the main shaft of the working machine. When the reducer is working, the reaction torque acting on the reducer case body is balanced by the reaction torque bracket installed on the reducer case body or by other methods.The machine is directly matched, and the other end is connected with the fixed bracket.

Third, the device of the anti-torque support

The anti-moment bracket should be installed on the side of the reducer facing the work machine to reduce the bending moment attached to the work machine shaft.The shaft sleeve at the connecting end of the anti-torque support and the fixed support uses an elastic body such as rubber to avoid deflection and absorb the torque fluctuation that occurs.