Sprocket processing manufacturers analyze screw conveyor chains and sprockets

If the chain of the screw conveyor and the chain of the sprocket shakes together with the head wheel, the chain and the gear are not properly meshed, resulting in noise.A simple and effective solution to this problem is to adjust the tensioning bucket elevator bolts to tighten the chain.During the unloading process, the screw conveyor chain and sprocket inevitably show the overflow of material, the material overflows on the head wheel or the tail wheel, so that the head wheel and the tail wheel are covered by the material, and even during the lifting process, the gear slip increases.Gear wear.

The tail gear of the screw conveyor has different degrees of wear, and the single chain plate of the chain also wears many dents.The damage of the head wheel and tail wheel must be checked in time, and the head wheel and tail wheel must be cleaned in time.Material, if the broken teeth are replaced in time, so as not to affect the work of the equipment.

When the screw conveyor chain and sprocket are running, if the front and rear wheels are not on the center line, the chain will be severely worn, and long-term use will lead to cracks in the future.In this regard, the direction of the bucket wheel and the tail wheel of the screw conveyor should be adjusted, the center line should be identified, and then the debugging work should be carried out.