(1) Installation requirements
①According to the model specification, select the correct model of the transmission sprocket.
② Check whether the position where the transmission sprocket is installed (transmission output countershaft, hub, etc.) is in good condition, otherwise it is necessary to overhaul or replace the relevant parts.
③ Install the main and driven sprockets in place according to the correct method, and tighten the fasteners to meet the specified torque requirements.
④ After installing the transmission chain and adjusting the tightness, check whether the chain and the sprocket are smooth and coplanar, and there is no interference with the chain cover.
①The driven sprocket should have anti-loosening measures.
②After the driven sprocket is loaded, the rear axle should be adjusted by the adjuster and the rear cradle (also called the rear wheel fork), which can not only prevent the rear wheel from deviating, but also avoid the early stage of the sprocket and the chain. wear.
③ It is best to replace the sprocket and chain at the same time. If only one of them is replaced, it will aggravate the wear of both parties.
④Due to the high speed of the driving sprocket and the small number of teeth, under the same conditions, it wears faster than the driven sprocket, which is a normal situation.
⑤ Regularly clean and lubricate the transmission chain, transmissionSprocket, to increase its service life.