XNUMX. The scope of application of the cycloid reducer:
X, B series cycloidal pin gear reducer is a kind of machine which realizes deceleration by the meshing of cycloidal pin teeth according to the principle of planetary transmission with less tooth difference.The machine is divided into horizontal, vertical, double-shaft and direct-connected assembly methods, and is the first-choice equipment for metallurgy, mining, construction, chemical, textile, light industry and other industries.
XNUMX. Main features of cycloid reducer:
1. The reduction ratio is large and the efficiency is high: the reduction ratio of the first-stage transmission is 9~87, the reduction ratio of the double-stage transmission is 121~5133, and the multi-stage combination can reach tens of thousands. Relative sliding, so the first-level deceleration efficiency reaches 94%.
2. Smooth operation and low noise: There are many pairs of teeth contacting at the same time during operation, the degree of coincidence is large, the operation is stable, the overload capacity is strong, the vibration and noise are low, and the models of various specifications have low noise.
3. Reliable use and long service life: The main parts are made of high carbon alloy steel quenched (HRC58-62) and then finely ground, and the cycloid tooth and the needle tooth sleeve are meshed and transmitted to the needle tooth to form rolling friction, friction The coefficient is small, so that there is no relative sliding in the meshing area, and the wear is extremely small, so it is durable.
4. Compact structure and small volume: Compared with other reducers of the same power, the weight and volume are more than 1/3 smaller. Due to the planetary transmission, the input shaft and output shaft are on the same axis to obtain the smallest possible size.
XNUMX. Technical parameters of reducer:
Single level: 9-87
Level 2057: 658503-XNUMX