Installation precautions for worm gear reducer

When installing the worm gear reducer, it must be firmly installed on the machine without loosening.During this process, it is necessary to confirm whether the steering of the reducer is correct, and then the installation operation can be carried out intermittently.The following editor will introduce to you the installation precautions of the worm gear reducer!

Worm gear reducer should not be stored for too long. If the oil seal is not immersed in the lubricating oil for more than 3 to 6 months, it is recommended that the user of the reducer replace the oil seal.Please follow the reducer operating rules, the standard working environment temperature is -5 degrees to 10 degrees.The reducer is usually used in conjunction with a reduction motor or motor, so it must be equipped with a ventilation device to improve heat dissipation and maintain normal operation.After installation, you must check the lubricating oil level first, instead of raising the load to the highest level immediately, it is recommended to increase it gradually. It is recommended to install a protective device around the worm gear reducer.