Related knowledge of cycloid reducer

Cycloidal pinwheel reducer is a novel transmission machine that adopts K-H-V less tooth difference one-type transmission principle and cycloid pin-tooth meshing. Drives and reduction gears in the field of construction machinery.The entire transmission device of the planetary cycloidal reducer can be divided into three parts: the input part, the deceleration part, and the output part.A double eccentric sleeve with a dislocation of 180 degrees is installed on the input shaft, and two roller bearings are installed on the eccentric sleeve to form an H mechanism. The center hole of the two cycloidal wheels is the raceway of the arm bearing on the eccentric sleeve, and The cycloid wheel is engaged with a group of pin-tooth pins arranged in a ring on the pin-tooth shell to form a small-tooth-difference internal meshing deceleration mechanism. Let's talk about the relevant knowledge of the cycloid pin wheel reducer.
Its principle is like two silver coins, one is stationary and the other is rotating against its edge. When the rotating coin returns from one point to the original point, it has already turned two times, not one.It is composed of gears inside, and the combination of dynamic and stationary gears is not externally engaged like a silver coin.Instead, one outer edge is engaged with the other inner edge to form a set, which saves space and can be stacked in a cylinder even if multiple sets are combined.The input and output shafts of the cylinder are on the same circle center, but the internal gears are not concentric. The driving wheel is smaller than the driven wheel and swings along the shaft while rolling along the side.