Precautions for safe use of reducer

With the continuous development of the industry and the demand of the market, the reducer is a relatively precise machine. The purpose of using it is to reduce the speed and increase the torque.So what should be paid attention to when using it?Next, we will introduce to you in detail:
  1. After 200-300 hours of operation, the oil should be changed for the first time. In the future use, the quality of the oil should be checked regularly, and the oil mixed with impurities or deteriorated should be replaced in time.Under normal circumstances, for the reducer that has been working continuously for a long time, the new oil should be replaced according to 5000 hours of operation or once a year. The reducer that has been out of use for a long time should also be replaced with new oil before restarting. The reducer should be added with the same oil as the original brand. , must not be mixed with oils of different grades, oils of the same grade but different viscosities are allowed to be mixed.
  2. When changing the oil, wait for the reducer to cool down until there is no danger of burning, but it should still be kept warm, because after complete cooling, the viscosity of the oil will increase and it will be difficult to drain the oil.Note: To cut off the power supply of the drive, prevent unintentional power on.
  3. The user should have reasonable use and maintenance rules and regulations, and carefully record the operation of the reducer and the problems found during the inspection. The above regulations should be strictly implemented.
  During work, when it is found that the temperature of the oil exceeds 80℃ or the temperature of the oil pool exceeds 100℃ and abnormal noise occurs, the reducer should be stopped, check the cause, remove the fault, and replace the lubricating oil before continuing to run.