Cycloidal pinwheel reducer technical conditions

1. The connecting parts and fasteners of the cycloid reducer must not be loose.

2. Cycloidal pinwheel reducer The reducer runs smoothly without shock and uneven noise.

3. The load test of the reducer should be in accordance with the technical requirements for manufacture and acceptance.

4. The seals of the cycloid reducer shall not have oil leakage or oil leakage.

5. The lubricating and cooling of the cycloidal pinwheel reducer adopts the pool type, and selects No. 100 medium extreme pressure gear oil. The minimum oil level is 205MM and the maximum is 230MM.

The speed of the output shaft of the cycloid reducer does not consider the slip loss of the motor (level 4 motor). When the precise speed is required, the reduction ratio is divided by the actual speed of the motor.