The purpose and conditions of use of the cycloid reducer

Eur-lex.europa.eu eur-lex.europa.eu

The cycloidal pinwheel reducer adopts the principle of cycloid pin-tooth meshing and planetary transmission, so it is usually called a planetary cycloid reducer. The planetary cycloidal pinwheel reducer can be widely used in petroleum, environmental protection, chemical industry, cement, transportation, Textile, pharmaceutical, food, printing, hoisting, mining, metallurgy, construction, power generation and other industries, as a drive or deceleration device, the machine is divided into horizontal, vertical, biaxial and direct-connected assembly methods.

Its unique stable structure can replace ordinary cylindrical gear reducers and worm gear reducers in many cases. Therefore, planetary cycloid reducers are widely used in various industries and fields, and are generally welcomed by the majority of users.

Conditions of Use:

1. The cycloid reducer is allowed to be used in the occasion of continuous working system, and it is allowed to run in both forward and reverse directions at the same time. Some models of the cycloid reducer only allow one-way rotation.

2、输入轴的转速额定转数为1500转/分,在输入功率大于18.5千瓦时建议采用960转/分的6极电机配套使用。

3. The working positions of the horizontally installed cycloidal pinwheel reducer are all horizontal. The maximum horizontal inclination angle during installation is generally less than 15°. When it exceeds 15°, other measures should be taken to ensure sufficient lubrication and prevent oil leakage.

4,Cycloid reducerThe output shaft cannot be subjected to large axial force and radial force, and other measures must be taken when there is large axial force and radial force.