How to use the oil when the cycloid reducer is in use?

The car needs gasoline to run, and the same is true for the cycloidal pinwheel reducer. The reducer needs to use oil to run.Every time you use the reducer, the oil will play a big role.Different cycloid reducers use different oil, and the oil used under different temperatures is also different.So how do we use oil to run the reducer?

1. The vertical installation of the planetary cycloid reducer should strictly prevent the oil pump from being cut off to avoid damage to the components of the cycloid reducer.

2. When refueling, you can turn the ventilation cap on the upper part of the base to refuel.When draining oil, unscrew the drain plug at the bottom of the base to drain the dirty oil.The cycloidal pinwheel reducer has no lubricating oil inside when it leaves the factory.

3. The newly issued cycloid reducer has been lubricated and replaced every six months.

4. The horizontal cycloidal pinwheel reducer is lubricated by oil pool under normal conditions, and the oil level can be kept in the middle of the oil window. When the working conditions are harsh and the ambient temperature is high, circulating lubrication can be used.

5. For the first 100 hours of refueling operation, new oil should be replaced, and the internal dirty oil should be flushed before continuous work. The 8-hour working system should be replaced every six months. If the working conditions are bad, the oil change time can be appropriately shortened. Practice has proved that the reducer Frequent cleaning and oil changes play an important role in extending the service life of the reducer.Lubricating oil should be replenished frequently during use.

6. The reducer is generally lubricated with 40# or 50# mechanical oil at room temperature. In order to improve the performance of the reducer and prolong its service life, it is recommended to use 70# or 90# extreme pressure gear oil, which can also be used in high and low temperature conditions. Lubricants should be reconsidered.

Based on the above analysis, it can be concluded that the oil plays a very important role in the operation of the entire cycloid reducer.Under the normal temperature, the use of oil can fully provide the performance of the cycloid reducer.When working for a long time and using the cycloid reducer, it can effectively protect the reducer and prolong its service life.