The unique advantages of micro cycloid reducer

Cycloidal pinwheel reducer occupies a high proportion in the reducer industry, but there are still more or less small problems in the process of use. After the manufacturer of the cycloid reducer receives feedback, the scientific and technological personnel are more invested in innovation , to manufacture miniature cycloidal pinwheel reducers to adapt to the industry market. Today, the editor has sorted out the advantages of miniature reducers for everyone to make purchases.
1. Large reduction ratio and high efficiency: the one-stage transmission reduction ratio is 9~87, the two-stage transmission reduction ratio is 121-5133, the multi-stage combination can reach tens of thousands, and the pin-tooth meshing system sleeve rolling friction, no meshing surface Relative sliding, so the first-stage deceleration efficiency reaches 94%.
2. Smooth operation and low noise: There are many pairs of teeth contacting at the same time during operation, the degree of coincidence is large, the operation is stable, the overload capacity is strong, the vibration and noise are low, and the models of various specifications have low noise.
3. Reliable use and long life: Because the main parts are made of high-carbon alloy steel quenching treatment (HRC58-62), and then finely ground, and the cycloidal teeth mesh with the needle gear sleeve and transmit to the needle teeth to form rolling friction. The coefficient is small, so that there is no relative sliding in the meshing area, and the wear is very small, so it is durable.
4. Compact structure and small size: Compared with other reducers of the same power, the weight is more than 1/3 smaller. Because of the planetary transmission, the input shaft and output shaft are on the same axis to obtain the smallest possible size.
5. High-speed ratio and high-efficiency single-stage transmission can achieve a reduction ratio of 1:87, and the efficiency is above 90%. If multi-stage transmission is used, the reduction ratio is larger.
Compact structure and small size. Because of the planetary transmission principle, the input shaft and output shaft are on the same axis, so that the size of the model can be as small as possible.
The operation is stable and the noise is low. The cycloid pin teeth have a large number of meshing teeth, a large overlap coefficient and a mechanism of machine balance, so that vibration and noise are limited to a minimum.Reliable use and long service life Because the main parts are made of high-carbon chromium steel, which is quenched (HRC58-62) to obtain high strength, and some transmission contacts use rolling friction, so they are durable and have a long service life.Reasonable design, convenient maintenance, easy disassembly and installation, minimum number of parts and simple lubrication make the cycloid reducer deeply trusted by users.