Conditions of use of cycloid reducer

Cycloidal pinwheel reducer can be widely used in petroleum, environmental protection, chemical industry, cement, transportation, textile, pharmaceutical, food, printing, lifting, mining, metallurgy, construction, power generation and other industries, as a driving or deceleration device, the The machine is divided into horizontal, vertical, biaxial and direct-connected assembly methods.So what conditions should be paid attention to when using it?

Conditions of Use
  1. Cycloidal pinwheel reducers are allowed to be used in continuous work situations, while allowing both forward and reverse rotation.Some models of cycloid reducers only allow one-way rotation.

  2、输入轴的转速额定转数为1500转/分,在输入功率大于18.5千瓦时建议采用960转/分的6极电机配套使用。

  3. The working positions of the horizontally installed cycloid reducer are all horizontal.The maximum horizontal tilt angle during installation is generally less than 15°.When it exceeds 15°, other measures should be taken to ensure adequate lubrication and prevent oil leakage.

  4. The output shaft of the cycloid reducer cannot be subjected to large axial force and radial force, and other measures must be taken when there is a large axial force and radial force.