Features of cycloid reducer

Cycloidal pinwheel reducers are widely used in petroleum, environmental protection, chemical industry, cement, transportation, textile, pharmaceutical, food, printing, lifting, mining, metallurgy, construction, power generation and other industries.Let me introduce its features to you below!

Cycloid reducer特点

  〇 High-speed ratio and high-efficiency single-stage transmission can achieve a reduction ratio of 1:87, and the efficiency is above 90%. If multi-stage transmission is used, the reduction ratio is larger.Cycloid reducer

The reduction ratio of the first-stage transmission is 9~87, the reduction ratio of the double-stage transmission is 121~5133, the multi-stage combination can reach tens of thousands, and the pin-tooth meshing system has rolling friction, and the meshing surface has no relative sliding, so the first-stage deceleration efficiency reaches 94%.
  〇Compact structure and small size. Because of the planetary transmission principle, the input shaft and output shaft are on the same axis, so that the size of the model can be as small as possible.

  〇Smooth operation and low noise. Cycloid needle teeth have a large number of meshing teeth, a large overlap coefficient and a mechanism of mechanical balance, so that vibration and noise are restricted to a minimum.

  During operation, the number of tooth pairs in contact at the same time is large, the degree of coincidence is large, the operation is stable, the overload capacity is strong, the vibration and noise are low, and the noise of various models is low.

  〇Reliable use and long service life Because the main parts are made of bearing steel material, which is quenched (HRC58~62) to obtain high strength, and some transmission contacts use rolling friction, so they are durable and have a long service life.

  Because the main parts are made of bearing steel quenched (HRC58-62) and then finely ground, and the cycloid tooth and the needle tooth sleeve are meshed and transmitted to the needle tooth to form rolling friction, the friction coefficient is small, so that there is no relative sliding in the meshing area. Minimal wear and tear, so durable.

  〇 Reasonable design, convenient maintenance, easy disassembly and installation, minimum number of parts and simple lubrication make the cycloidal pinwheel reducer deeply trusted by users.

  Compared with other reducers of the same power, the weight and volume are more than 1/3 smaller. Due to the planetary transmission, the input shaft and output shaft are on the same axis to obtain the smallest possible size.