Worm gear reducer solution

Worm gear reducer solution:
(1) Ensure the quality of the device.In order to ensure the quality of the installation, the factory purchased and cheap some special tools. When disassembling and installing the worm gear, worm, bearing, gear and other components of the reducer, try to avoid hitting it directly with other things such as a hammer; when replacing gears, worm gears and worms, Try to choose original parts and replace them in pairs; when installing the output shaft, pay attention to the cooperation of public service, D≤50mm, choose H7/k6, D>50mm, choose H7/m6, and use anti-sticking agent or red dan oil together. Protect the hollow shaft, avoid wear and rust, avoid cooperating area scale, and it is difficult to disassemble during maintenance.
(2) Selection of lubricating oil and additives.Worm gear reducers usually use 220# gear oil. For some reducers with heavier loads, frequent starting, and poor operating environment, the factory also selected some lubricating oil additives (such as Anzhi Chemical Company's) to reduce speed. When the machine stops working, the gear oil still adheres to the surface of the gear, forming a protective film to avoid heavy load, low speed, high torque and metal-to-metal contact during starting.The additive is also rich in sealing ring adjuster and anti-leakage agent, which keeps the sealing ring soft and elastic, and effectively reduces the leakage of lubricating oil.
All in all, the hollow shaft worm reducer is convenient to install, reasonable in layout and reliable in use.Of course, you should also pay attention to the selection of the trademark of the reducer. A strong company will describe the key points such as the appearance of the reducer, the placement of the heat dissipation ribs, the calculation of the heat balance, the description of the oil circuit, etc., and the actual application and operating conditions of the reducer. Excellent production technology produces high-quality, reliable and durable reducers.Users only need to use the protection correctly to get the desired effect