Analysis of common problems of worm gear reducer

Analysis of common problems of worm gear reducer: The gear-worm gear reducer is a transmission machine with compact structure, large transmission ratio and self-locking function under certain conditions.Moreover, the installation is convenient, the structure is reasonable, and it is more and more widely used.It is a helical gear reducer installed at the input end of the worm gear reducer, and the formed multi-stage reducer can obtain a very low output speed, which has higher efficiency than a single-stage worm gear reducer, and has less vibration, noise and energy. Low.
When installing the worm gear reducer, it must be firmly installed on the machine without loosening.During this process, it is necessary to confirm whether the steering of the reducer is correct, and then the installation operation can be carried out intermittently.The reducer should not be placed for too long, more than 3 to 6 months, and if the oil seal is not immersed in lubricating oil, it is recommended that the reducer user replace the oil seal.Please follow the code for use of the reducer, the standard working environment temperature is -5 degrees to 10 degrees, if it exceeds this rated value, please contact the manufacturer.The reducer is usually used in conjunction with a geared motor or motor, so a ventilation device must be installed to improve heat dissipation and maintain normal operation.When using it after installation, the lubricating oil level must be checked first, and the load should not be raised to the highest immediately. It is recommended to gradually increase it. It is recommended to install protective devices around the worm gear reducer.