Here, we mainly describe the three aspects of the installation relationship between the shaft-mounted geared motor and the working machine, the connection between the shaft-mounted geared motor and the working machine, and the installation of the anti-torque bracket.The following is a small series to describe in detail how to install.gear reducer, cycloid reducer, worm gear reducer
XNUMX. The installation relationship between the shaft-mounted gear motor and the working machine
In order to avoid the deflection of the main shaft of the working machine and the additional force on the bearing of the reducer, the distance between the reducer and the working machine should be as small as possible without affecting the normal work, and its value is 5-10mm.gear reducer, cycloid reducer, worm gear reducer
Second, the installation of the anti-torque bracket
The counter-moment support should be installed on the side of the working machine that the reducer faces to reduce the bending moment attached to the working machine shaft.The counter-torque bracket and the shaft sleeve of the fixed supporting connection end use rubber and other elastic bodies to prevent deflection and absorb the generated torque fluctuations.
XNUMX. The connection between the shaft-mounted gear motor and the working machine
The reducer is directly sleeved on the main shaft of the working machine. When the reducer is running, the reaction torque acting on the reducer case body is balanced by the reaction torque bracket installed on the reducer case body or other methods.The machine is directly matched, and the other end is connected with the fixed bracket.