Worm Gear Reducer - Shaft Mounted Gear Motor Installation

XNUMX. The installation relationship between the shaft-mounted gear motor and the working machine

In order to avoid the deflection of the main shaft of the working machine and the additional force on the bearing of the reducer, the distance between the reducer and the working machine should be as small as possible without affecting the normal work, and its value is 5-10mm.gear reducer, cycloid reducer, worm gear reducer

Second, the installation of the anti-torque bracket

The counter-moment support should be installed on the side of the working machine that the reducer faces to reduce the bending moment attached to the working machine shaft.The counter-torque bracket and the shaft sleeve of the fixed supporting connection end use rubber and other elastic bodies to prevent deflection and absorb the generated torque fluctuations.

XNUMX. The connection between the shaft-mounted gear motor and the working machine

The reducer is directly sleeved on the main shaft of the working machine. When the reducer is running, the reaction torque acting on the reducer case body is balanced by the reaction torque bracket installed on the reducer case body or other methods.The machine is directly matched, and the other end is connected with the fixed bracket.