Gear reducer is an important working link in transmission equipment, which plays a vital role in improving the bearing capacity and service life of the gear reducer. After the reducer is selected, add lubricating oil (gear oil or engine oil), and install it. On the workbench, use a height gauge to measure and adjust the center height of each test instrument and reducer.After making them at the same center height, fix them with bolts and washers, add a small load, and perform a running-in test run.After running for a period of time, pour out the lubricating oil, check whether the oil contains metal powder, and re-clean it. Then add lubricating oil and run again until no metal powder is found.Finally re-applied the lubricating oil seal and began to increase the load for the test.
When the gear reducer is used for the first time, it is essential to conduct a trial run first.Many users tend to ignore this preliminary work, which eventually leads to poor operation of the reducer or damage to the reducer, thereby increasing the cost of investment.Therefore, the trial operation of the gear reducer is an investment that helps users reduce costs, thereby greatly improving the service life and quality of the reducer.