What kind of oil is added to the cycloid reducer when it leaves the factory?

If the factory is refueled, it is generally grease, and grease such as molybdenum disulfide-2 or ZL-2 lithium-based grease is used.

Because the reducer at the factory is convenient for loading, unloading and transportation.Generally, no lubricating oil is injected, and lubricating oil is injected before use. It is recommended to use N150 extreme pressure industrial gear oil at room temperature.Lubricating oil replacement cycle: The reducer must be replaced for the first time after the initial operation of 200 hours, and the residual oil should be removed during replacement.After the first oil change, the reducer will work continuously for more than 3 hours every day.The lubricating oil should be replaced every 10 months, and the reducer that works no more than 6 hours a day should be replaced every 12 months.The reducer that has not been used for a long time (generally more than XNUMX months) must be replaced with lubricating oil before reuse. Different types of lubricating oil cannot be mixed!