Teach you to easily deal with the installation and lubrication of the gear reducer

The gear reducer is a speed converter that uses gears to reduce the number of revolutions of the motor to the desired number of revolutions and obtain a larger torque.The installation and use of the gear reducer is directly related to its operating effect, and must comply with technical specifications and standards.As a power transmission structure, the normal operation of the gear reducer is inseparable from the lubricating oil, so in the process of use, special attention should be paid to the lubrication of the gear reducer.The following editor will introduce the installation and lubrication precautions of the gear reducer for your reference.
First, the installation
1. The gear reducer generally needs to be installed on the horizontal plane and the inclination should not exceed 10°. If the inclination is greater than 10° due to special needs, please contact our company before use to discuss related matters.
2. When the input shaft and output shaft are connected with the power and supporting machinery, if the coupling is used for connection, the shaft and the shaft are required to be strictly aligned, and there should be no misalignment. The use of V-belts and chains should not be too tight or too loose.
3. The installation foundation should be firm and reliable, and there should be no vibration or loosening. The fixing screws should be selected in strict accordance with relevant standards and regulations.
4. The installation screws should be checked irregularly whether they are tightened and fixed firmly, and the gaskets should be spring gaskets as much as possible.
XNUMX. Lubrication
1、齿轮减速机一般采用油池润滑,使用前注意一定要加好中极压齿轮油N220或N320到规定位置(较低齿部处上20-30mm),并定期补充。
2. After 50 hours of initial use, the new oil should be replaced immediately, and the internal oil stains of the body should be cleaned. After that, it should be completely replaced every three months.
3. If the oil seal leaks, please replace it as soon as possible.