Precautions for the use of planetary reducer

forReducerIt is an indispensable auxiliary tool in some mechanical equipment. However, no matter what kind of reducer we are talking about, we must pay attention to its use-related matters, so as to ensure the safety during use and the smooth progress of the work. .

  1. Under normal circumstances, for the planetary reducer that works continuously for a long time, the new oil should be replaced according to 5000 hours of operation or once a year. The planetary reducer that has been out of use for a long time should also be replaced with new oil before restarting. The original oil of the same grade should not be mixed with oils of different grades, and oils of the same grade but different viscosities are allowed to be mixed.

  2. When changing the oil, wait for the planetary reducer to cool down and there is no danger of burning, but it should still be kept warm, because after complete cooling, the viscosity of the oil will increase and it will be difficult to drain the oil.Note: To cut off the power supply of the drive, to prevent unintentional power on!

  3. During work, when the oil temperature rises above 80°C or the oil pool temperature exceeds 100°C and abnormal noise is found, stop using it, check the cause, remove the fault, and replace the lubricating oil before continuing to run .