The reason for the wide use of cycloid reducer

now in manyReducerAmong them, the cycloidal pinwheel reducer is produced according to the transmission principle of the planetary reducer with small tooth difference. At the same time, the cycloidal pinwheel reducer is divided into horizontal, vertical and biaxial assembly methods. What are the unique characteristics of the wheel reducer?

  1. Large reduction ratio and high efficiency: the one-stage transmission reduction ratio is 9~87, the two-stage transmission reduction ratio is 121-5133, the multi-stage combination can reach tens of thousands, and the pin-tooth meshing system sleeve rolling friction, no meshing surface Relative sliding, so the first-stage deceleration efficiency reaches 94%.

  2. Smooth operation and low noise: There are many pairs of teeth contacting at the same time during operation, the degree of coincidence is large, the operation is stable, the overload capacity is strong, the vibration and noise are low, and the models of various specifications have low noise.

  3. Reliable use and long service life: The main parts are made of high carbon alloy steel quenched and then finely ground, and the cycloid tooth and the needle tooth sleeve are meshed and transmitted to the needle tooth to form rolling friction, the friction coefficient is small, and the meshing There is no relative sliding in the area, and the wear is very small, so it is durable.

  4. Compact structure and small size: Compared with other gear reducers of the same power, the weight and volume are more than 1/3 smaller. Because of the planetary transmission, the input shaft and output shaft are on the same axis to obtain the smallest possible size.