What are the characteristics of the reducer used in mechanical equipment

There is a power transmission device in our life that isReducer, The reducer uses the speed converter of the gear to reduce the number of revolutions of the motor to the required number of revolutions, thereby greatly improving the use of the reducer. We will introduce the application scope of the reducer in machinery in detail.

  Its traces can be seen in almost all kinds of mechanical transmission systems, from ships, automobiles, locomotives, heavy machinery for construction, processing machinery and automated production equipment used in the machinery industry, to common in daily life. Home appliances, clocks, etc.Its applications range from the transmission of large power to small loads and precise angle transmission. The application of the reducer can be seen, and in industrial applications, the reducer has the functions of decelerating and increasing torque.

  The main function of the reducer is to decelerate and increase the output torque. The torque output ratio is multiplied by the motor output and the reduction ratio, but it should be noted that the rated torque of the reducer cannot be exceeded.Deceleration reduces the inertia of the load at the same time, and the reduction of inertia is the square of the reduction ratio.You can see that the general motor has an inertia value.In order to learn the manufacturing process of the reducer, it is necessary to systematically and comprehensively understand the relevant knowledge of the reducer.

  The reducer is generally used for low-speed and high-torque transmission equipment. The power of the motor, internal combustion engine or other high-speed operation is achieved by meshing the gear with a small number of teeth on the input shaft of the reducer with the large gear on the output shaft to achieve the purpose of deceleration. The reducer will also have several pairs of gears with the same principle to achieve the ideal deceleration effect. The ratio of the number of teeth of the large and small gears is the transmission ratio.