What are the steps to install the reducer?

Speed ​​machines are used in industrial sectors such as lifting and transportation, construction machinery, metallurgy, mining, petrochemicals, construction machinery, light industrial textiles, medical equipment, instrumentation, automobiles, ships, weapons and aerospace.What are the steps of how to install it?

installation method

The correct installation, use and maintenance of the reducer is an important part of ensuring the normal operation of mechanical equipment.Therefore, when you install the reducer, please strictly follow the installation and use related matters below, and carefully assemble and use it.

The first step is to confirm whether the motor and reducer are intact before installation, and strictly check whether the dimensions of the parts connecting the motor and the reducer match, here are the dimensions and fit of the positioning boss of the motor, the input shaft and the groove of the reducer tolerance.

The second step is to unscrew the screw on the dust-proof hole on the outer side of the reducer flange, adjust the clamping ring so that the side hole is aligned with the dust-proof hole, and insert the inner hexagon to tighten.After that, remove the motor shaft key.

The third step is to connect the motor and the reducer naturally.When connecting, it must be ensured that the concentricity of the output shaft of the reducer and the input shaft of the motor is the same, and the outer flanges of the two are parallel.If the concentricity is inconsistent, it will cause the motor shaft to break or the gear of the reducer to wear.