Tips for using the reducer

Today, let's introduce some tips for using the reducer
1. After 200~300 hours of continuous operation, the first oil change should be carried out, and the quality of the oil should be checked regularly in future operations. It is necessary to replace the oil mixed with impurities or degenerated in time.Under normal circumstances, for the reducer that operates continuously for a long time, it is the norm to replace the new oil with 5000 hours of operation or once a year, and the reducer that has been out of use for a long time should be replaced with new oil before restarting the operation.The reducer should be added with the same oil as the original brand. It is best not to mix it with oils of different brands, but oils with the same brand but different viscosities are allowed to be mixed.
2. When changing the oil, wait for the reducer to cool down without the risk of burning, but it should still be kept warm, because when the oil temperature is completely cooled, the viscosity of the oil increases and it is difficult to drain the oil.However, it is necessary to pay attention to: cut off the power supply of the transmission device to avoid unintentional energization;
3. During operation, when it is found that the oil temperature rises over 80°C or the oil pool temperature exceeds 100°C and abnormal noise occurs, the operation should be stopped, the cause should be checked, it is necessary to eliminate the fault, and the lubricating oil can be replaced before continuing. Operation;
4. The user should have reasonable operation and protection rules and regulations, and a special machine manager should carefully record the operation status of the reducer and the problems found in the inspection, and strictly implement the above requirements.